Palmetto Street Church of God

Operations Hub

Excellence is our Standard and Salvations are our Mission.

Everything the production team needs for Sunday and Wednesday: what to turn on, what to watch for, and how to shut it all down. Pick your area, open a section, and tick the steps as you go.

Areas

Sunday at a glance

Before the service

  1. Building walk: gym hall TV, back hall TVs, security room TVs, radios, foyer TVs, giving kiosk.
  2. Sanctuary power: choir room breakers left to right, then the two starred speaker breakers in the kids closet.
  3. Front of house: sound booth key twice, FOH Mac with Lightkey and ProPresenter up, wall panel to Console then Stop, projectors on.
  4. Cameras and stage: tally lights, cameras 1 through 8, Teradeks, drum cam 7, headsets with the "M" headset first.
  5. Production room: unlock the door, wake the computer, SQ7 on, check ATEM, Resi showing "STARTED" and ProPresenter on the Sunday playlist, start translation.

During the services

  1. 9 AM: put 8Cam in program. When it ends, click the first announcements slide and press End of Service.
  2. 10:46 AM: the pre-roll starts on its own if ProPresenter is the front window. Press Start Record with 1 minute left.
  3. Countdown hits 0:00: press Reset, then turn Lower Thirds on.
  4. End of 11 AM: Lower Thirds off, play the Post Roll Video, press End of Service. When the Palmetto Street logo appears, stop the encoder in Resi (Encoders box, top right), then press Stop Record.

After the service

  1. Shut down in this order: production room, cameras and stage, front of house (power down the Avantis before turning the key), breakers (speakers first), building.

Wednesday nights: recorded only, on a Resi schedule. In the production room, only camera 8 and the sound board are on.

Building and TVs

Wayfinding TVs, the foyer TVs and the giving kiosk.

Startup4 sections
Gym hall TV5 steps
  • You should see the slides come up. That is not the sign yet.

  • Samsung Sources menu with UDisk highlighted
    Samsung Sources menu with UDisk highlighted
  • UDisk file list showing the sign pictures stored on the USB stick
    UDisk file list showing the sign pictures stored on the USB stick
  • Gym hall TV showing the Midshift, Shift Students, Fellowship Hall and Youth Room sign
    Gym hall TV showing the Midshift, Shift Students, Fellowship Hall and Youth Room sign
Back hall TVs (by kids check-in)4 steps
  • Hand reaching to the power button under the bottom center edge of the TV
    Hand reaching to the power button under the bottom center edge of the TV
  • Shield the remote so the left TV does not pick it up and change too.

Foyer TVs4 steps
  • You should see both come up on the right channel. The right TV is set to PC for the rolling announcements; the left TV is set to PC for the livestream.

  • Remote on the shelf under the granite welcome desk counter
    Remote on the shelf under the granite welcome desk counter
  • Shield the remote so only that TV picks it up.

  • High hallway TV showing the Women's Restroom, Discipleship Rooms 101-105, Family Room and Entry 2 and 3 sign
    High hallway TV showing the Women's Restroom, Discipleship Rooms 101-105, Family Room and Entry 2 and 3 sign
Giving kiosk4 steps
  • Hand tapping the SecureGive icon on the kiosk desktop
    Hand tapping the SecureGive icon on the kiosk desktop
  • Giving kiosk ready on the Welcome to PSCOG screen
    Giving kiosk ready on the Welcome to PSCOG screen
  • Its light goes from red to blue. Blue means the signal is good; red means it is weak, but it can still work.

  • Wait about 10 seconds, plug it back in, and wait for it to reboot. Everything restarts, including the card reader.

    Give it a few minutes to cycle through before you double tap SecureGive again.

    Kiosk power cord at the wall outlet; the top plug is the one to pull
    Kiosk power cord at the wall outlet; the top plug is the one to pull
Fixes1 section
If a foyer TV is wrongReference
  • Right TV not showing the slides: at the rack in the security room, check the Dell computer's power light. If the light is off, turn the computer back on. The slides restart by themselves.
    Finger on the power button of the Dell computer in the rack, under the two Netgear units
    Finger on the power button of the Dell computer in the rack, under the two Netgear units
  • Left TV says "HDMI Cable: No Signal": at the rack in the security room, reset the small switcher for that TV. Press its reset button, or unplug it and plug it back in.
    Foyer livestream TV showing HDMI Cable: No Signal
    Foyer livestream TV showing HDMI Cable: No Signal
    Small switcher box behind the rack being unplugged and plugged back in
    Small switcher box behind the rack being unplugged and plugged back in

    The same fix works for any TV that loses the livestream: unplug and replug its little switcher.

    You should see the No Signal message gone and audio playing. The camera picture appears once the sanctuary cameras are on.

Shutdown1 section
Building shutdown3 steps

Security

Security room TVs, camera views and the 12 radios.

Startup2 sections
Security room TVs8 steps

No photos here on purpose: the video shows the camera views, so decide who gets this link.

  • You should see all three TVs on HDMI 3. This does not disturb the TV already on the livestream.

  • The small TV down low is for the livestream. It also needs to be on HDMI 3; use the remote or the buttons on the TV.

Security radios8 steps

A one-page handout for the security team is here: Security Radio Instructions sheet.

  • Radios in the Rapid charging dock with the quick start guide taped above
    Radios in the Rapid charging dock with the quick start guide taped above
  • Radios in the dock with their screens lit
    Radios in the dock with their screens lit
  • Check the screen: if a specific name shows under your radio's name, only that person hears you.

  • You should see a red light while it charges, green when it is fully charged.

Radio nameWho carries it
EarlyChildEarly Childhood Leader - Sun or Wed Services
FoyerFoyer
Kids CheckKids Check-in Desk
Kids LeadValarie O'Connor / Kids Church
Medical 1Medical team
Medical 2Medical team
Officer 1Security officer - Front
Officer 2Security officer - Back
Security RmSecurity Room
Staff 1John Mark Calhoun - 11:00am Service Contact
Staff 2Johnny Miller - 9:00am & Wed Services Contact
StudentsJoel Taylor / Gym

Front of House

Breakers, sound, lighting, ProPresenter and projectors.

Startup6 sections
Sanctuary lights and truss4 steps
  • You should see all the sanctuary lights on, and hear the truss gear powering up. The truss speakers are still off.

  • Why no sound comes through the main speakers until these two are on.

    Always do the sanctuary breakers first, then the speakers.

FOH sound system2 steps
  • You should see more lights come on and the soundboard start up.

FOH Mac7 steps
  • Why the Stream Deck lighting buttons, such as Pre lights and Preach lights, run from that cue list.

FOH lighting: Wall Panel Pro and Lightkey5 steps
  • You should see the lights flicker and change slightly. The blue and green Stream Deck buttons now set the look for each part of the service.

FOH ProPresenter4 steps
Projectors3 steps
  • You should see "Panasonic" on each screen, and hear the fans.

Shutdown2 sections
Front of house shutdown5 steps
    1. Tap Utility on the board. If Power Down is not on the screen, open the Status tab.
    2. Tap Power Down, then Continue on "Shut down the desk," then Yes.
    3. Wait through "please wait" for the message "it is now safe to power off your console."
  • You should see the board cut off and some of the lights go out.

    Why the key cuts power to the board, so the board has to finish shutting down first.

Breakers off2 steps
  • Why this is the reverse of startup. Speakers go off before everything else on the truss.

Cameras and Stage

Cameras 1 through 8, tally lights, Teradeks and headsets.

Startup10 sections
Camera settings referenceReference

These are already set on the cameras. Do not change them; use the table to spot a camera that has been bumped.

SettingValue
Frame rate29.97
White balance3150K
Studio camerasf/11 with 10 dB gain
Pocket 6K camerasf/5.6
Cameras 4 and 5Press F1 for worship and F2 for preaching. These buttons adjust the iris.

The Studio cameras can lose focus while zooming. Press the autofocus button after a zoom.

Tally lights4 steps
  • You should see a yellow flash, then four lights on. Those four lights are also the battery meter.

Camera 18 steps
  • Thumb pressing the CHECK button, five green lights lit
    Thumb pressing the CHECK button, five green lights lit
  • Red D-Tap cable being plugged into the V-mount battery
    Red D-Tap cable being plugged into the V-mount battery
Camera 25 steps
  • You should see the camera and the Teradek turn on. The screen stays off, with a red light.

Camera 34 steps
  • You should see the whole camera turn on.

Balcony cameras 4 and 55 steps

Do camera 4, then camera 5 the same way.

  • Balcony camera 4 with the lens cap still on
    Balcony camera 4 with the lens cap still on
  • Lit button column on the side of the camera viewfinder
    Lit button column on the side of the camera viewfinder
Balcony cameras 6 and 86 steps

Camera 8 is the full stage shot, with the short lens. Camera 6 is the tight shot on the pastor.

  • You should see the camera turn on and the lens adjust.

  • You should see the camera 6 shot. To check camera 8, move the HDMI cable over to camera 8.

Stage Teradeks (cameras 1, 2 and 3)4 steps
  • First Teradek on its stand at stage right
    First Teradek on its stand at stage right
    Second Teradek on its stand
    Second Teradek on its stand
    Close-up of the Teradek unit; the power switch is on the back
    Close-up of the Teradek unit; the power switch is on the back

    You should see "no video" at first. Once the camera is fully on, it changes to "receiving video."

  • Wall outlet beside the drum cage and the brown-taped power cable
    Wall outlet beside the drum cage and the brown-taped power cable
    Camera 1 Teradek mounted on top of the drum cage
    Camera 1 Teradek mounted on top of the drum cage
  • You should see "sending video" on each camera's Teradek and "receiving video" on each one at the stage.

Drum cam 74 steps
  • You should see the white light on the camera come on. A fan may start too.

    Brown-taped camera power cable at the power strip in the drum cage
    Brown-taped camera power cable at the power strip in the drum cage
Headsets4 steps
  • Why none of the other headsets work unless the master is on and powered up.

    The master headset is the one labeled "M".

    Headset held in hand showing the power switch on the ear cup
    Headset held in hand showing the power switch on the ear cup
  • You should see the light blink while it pairs, then go solid, and hear "connection completed." It takes a few seconds.

Shutdown1 section
Cameras and stage shutdown10 steps

Production Room

Door, computer checks, sound board, translation and the switcher.

Startup3 sections
Door and computer checks7 steps
  • You should see the XLR and Master channels (far right) showing moving green meters, and sound on the TV.

    ATEM Software Control audio page; XLR and Master are the two channels at the far right
    ATEM Software Control audio page; XLR and Master are the two channels at the far right
  • You should see under Encoders on the right, a green "STARTED" tag under Palmetto Street Church.

    Resi dashboard with the Encoders box on the right showing a green STARTED tag
    Resi dashboard with the Encoders box on the right showing a green STARTED tag
  • You should see the "Sunday" playlist selected in the left sidebar and the order of service listed under it.

    ProPresenter with the Sunday playlist selected and the announcements roll showing
    ProPresenter with the Sunday playlist selected and the announcements roll showing
  • Monitor layout with ProPresenter in front and the Resi dashboard peeking out on the right
    Monitor layout with ProPresenter in front and the Resi dashboard peeking out on the right
Production room sound board3 steps
  • You should see the board start up.

Translation computer8 steps
  • You should see text start to transcribe once the pastor's headset is live.

Know your controls3 sections
Stream Deck basicsReference
ButtonWhat it does
Top camera buttons (purple)Cut straight to program. The live one shows red.
Lower camera buttons (blue)Put a camera in preview. The selected one shows green.
Room Lights On / OffThe production room accent lights, not the overhead lights.
Lower Thirds On / OffLyrics and lower thirds on M/E 2, and on both when mirrored.
Start / Stop RecordThe HyperDecks, recording a clean feed to a hard drive. Start with 1 minute left on the countdown; stop at the end of the service.
ResetMac audio off; sanctuary sound from the SQ7 on for the stream.
End of ServiceMac audio on so a video can play; sanctuary sound muted on the stream.
Cut / AutoTake the preview to program from the Stream Deck.
Go to ME1 / Go to ME2Switches which M/E the Stream Deck controls. If it reads "Go to ME1," you are on M/E 2 now.
ATEM audio for onlineReference
  • Make sure the SQ7 board is on.
  • Press Reset on the Stream Deck, then look at the ATEM Software Control audio page.

    You should see the Mac channel all the way down, the TRS channel (the line in from the SQ7) up and on, and Master up.

  • When anything plays in the sanctuary, check for moving levels in ATEM and on the Resi encoder's volume meter.
  • To play Mac sound for the countdown or a video, press End of Service.

    You should see the Mac channel come up and the TRS channel go down.

  • Press Reset to go back to sanctuary sound.
Switcher: M/E 1 and M/E 2Reference

M/E 1 is online. M/E 2 is in house.

  • For worship, stay on M/E 2 with everything mirrored. Each cut changes both the house screens and the stream.
  • Keep Lower Thirds on at the Stream Deck so lyrics show on M/E 2.
  • To switch online separately from the house, move to M/E 1 on the switcher. From then on, your cuts change the stream only.
  • While separated, press DSK 1 Cut to put lyrics and scripture back on both house and online. It has to stay on.
  • To mirror again: turn DSK 1 off. On M/E 1, press House ME2 Live (shows red) and House ME2 Preview (shows green). Then go back to M/E 2 and switch as normal.

    Why those two House ME2 buttons on M/E 1 are what make the stream follow the house.

Shutdown2 sections
Production room shutdown6 steps
Batteries, headsets and radios7 steps
  • You should see red while charging, green when full. The charger only charges two at a time; the other two start when the first pair finishes.

Service Run

The 9 AM handoff, the 10:46 pre-roll, ending the stream, and Wednesdays.

Sunday3 sections
9 AM service3 steps

The 9 AM service feeds the hallway and foyer TVs, so one camera stays in program for volunteers out there.

  • The top two rows are Program buttons. The bottom two rows (blue) are Preview buttons.

    You should see the service on the hallway and foyer TVs.

    Stream Deck layout: program buttons in the top two rows, preview buttons in the bottom two, with Lower Thirds, Reset, End of Service, Cut and Fade on the right
    Stream Deck layout: program buttons in the top two rows, preview buttons in the bottom two, with Lower Thirds, Reset, End of Service, Cut and Fade on the right
  • What it does lowers the sanctuary sound and raises the Pro Mac sound, ready for the pre-roll.

Between services and the 11 AM start6 steps

The pre-roll countdown starts by itself at 10:46 AM, but only if ProPresenter is the front window.

  • Why any other window in front stops the pre-roll from starting on time.

  • You should see the countdown video playing.

  • What it does starts the HyperDecks recording a clean feed to the hard drive.

  • What it does, in order lowers the Pro Mac sound, raises the sanctuary volume, and cuts to the camera in preview.

  • You should see lyrics and lower thirds from ProPresenter on the stream.

End of 11 AM and stopping the stream7 steps

Do these in order, and do not stop the stream until the Palmetto Street logo is on screen.

  • What it does, in order lowers the sanctuary volume, raises the Pro Mac volume, and switches the Pro Mac screen into program.

  • Not the red stop square in the Live Event box on the left. Both look the same; use the one on the right.

  • Stop Encoder prompt with the red Stop button at the bottom right
    Stop Encoder prompt with the red Stop button at the bottom right

    You should see the encoder box says "STOPPED".

Wednesday1 section
Wednesday nights4 steps

Wednesday nights are recorded only, not livestreamed, so most of the Sunday production room steps do not apply.

After the service, Johnny pulls the recording from Resi and cuts the audio for the podcast. Volunteers do not need to do anything with it.

If Something Goes Wrong

First fixes for the stream, audio, lyrics and headsets.

Fixes2 sections
Quick fixesReference

Check the first fix, then text Johnny at 912-484-3627 if it does not clear in a minute.

What you seeCheck this first
Pre-roll did not start at 10:46 AMProPresenter is not the front window. Click it and confirm the announcements roll is running.
A Teradek display says "no video"Both ends have to be on: the camera, battery and Teradek on each of cameras 1, 2 and 3, the two Teradeks at stage right, and the brown-taped plug at the drum cage.
Headsets will not connectThe master headset has to be on first. Turn it on, then turn the others on again.
Hallway and foyer TVs are not showing the 9 AM service8CAM is not in program. Press 8Cam in the second row of the Stream Deck.
No lyrics or lower thirds on the streamThe Lower Thirds button on the Stream Deck is off.
Resi encoder does not say "started"If it says "not started": refresh the page, or log in again (the user name and password autofill in Chrome). If it says "OFFLINE": power cycle the encoder. Unplug the power from the back of the "Living As One" encoder, wait 15 seconds, plug it back in, then press the small reset button on the front.
No meters or sound on XLR and Master in ATEMPress the Reset button on the Stream Deck; that usually fixes it. If not, check the channel in ATEM Software Control: Mute is not clicked, ON is clicked, and the slider is up at 0 dB.
ProPresenter missing from the multiview, or lyrics not keyingReference

This happens every now and then, and it also breaks lyrics, scripture and graphics on the stream.

  1. Click a logo slide in ProPresenter. If it does not show on the multiview, go on.
  2. Open Screens, then Configure Screens. Look for the Blackmagic or the DeckLink Duo output showing as disconnected.
  3. Quit ProPresenter and open it again. If it hangs, use the Apple menu, Force Quit, and pick ProPresenter. It has quit when the dot under its icon is gone.
  4. Click the logo slide again, then any lyric, and press Lower Thirds on the Stream Deck. If the lyric shows on the stream, you are done.
  5. If lower thirds still do not key, unplug the power from the Echo Express, wait 15 seconds and plug it back in. Its blue light is not a reliable sign either way.
  6. Open Screens, then Configure Screens again and confirm the Blackmagic and DeckLink Duo outputs are correct. You may have to pick the DeckLink Duo output again.
  7. Quit and reopen ProPresenter once more, click a lyric and press Lower Thirds to test.